SDM en la industria de los túneles

Tarea de medición

Density determination of a water/solids slurry.

• Pipe diameter: 150 mm (6 inch)
• Pipe material: steel
• Solids: 1-25 wt%
• Density: 1050 -1400 g/l
• Temperature: 10°C – 20°C (50°F – 68°F)

Instrumento utilizado

Introducción

The customer, who has been active in the tunneling industry for years, had to drill a new 200-meter sewer for their project. ‘Clean mud’ (water with Bentonite) is pumped from the clean mud tank into the drilling pipe and escapes at the drilling head during drilling. The ‘dirt mud’ is reappearing in the drilling well (starting point of drilling). When the drilling well is almost full, it will be pumped into the Recovery Unit (RU), where the ‘Mudmasters’ will optimize the Bentonite recovery. The sand particles are absorbed by bentonite. As sand does not mix well with water, but Bentonite does, this process went very smoothly thanks to the bentonite. One bentonite particle can be recovered five times. The Mudmaster can optimize the recovery of the mud by controlling the wt% solids.

Goal

The first goal is the removal of the manual sampling by the ‘Mudmaster’ and replacing it with an in-line, real-time continuous density measurement to optimize the recovery process.

The second goal is to read the density after the test and determine a relationship between the percentage of solids that enter the recovery unit and the wearing of the unit. If the wt% of solids can be controlled, they can avoid excessive wear and save money on maintenance and pipe replacements for the recovery unit.

Resultados 

During the week, the SDM values and the reference samples (taken by the Mudmaster) variated around 1% from each other. The customer gained confidence that the SDM can take over the density reading and eliminate the need for manual sampling. It will save the Mudmaster a significant amount of time. As the SDM is measuring both inline and real-time, the Mudmaster is capable of optimally controlling the recovery process.

After an investigation of the logging files, the maintenance manager could easily identify when the wt% solids were high and causing unnecessary wear. Due to the logging files, the Mudmaster and Maintenance Manager learned where the recovery process can be optimized next time. Also, they can show their colleagues what the production was like during the week by plotting the data. Therefore, the customer will have competitive advantages in the tunneling industry.

Puede hacer clic en la siguiente imagen para descargar el estudio de caso.

Póngase en contacto con Rhosonics para obtener más información sobre la concentración química o el control de la densidad. Si desea obtener más información sobre nuestras aplicaciones, consulte también nuestro casos de clientes y seminarios web.

¿Desea recibir actualizaciones frecuentes sobre nuestros productos? Entonces suscríbase a nuestro boletín o síganos en nuestras redes sociales en LinkedIn y Facebook.