Prueba comparativa SDM en Francia

Tarea de medición

Density determination of a water/solids slurry.

• Pipe diameter: 300 mm (12 inch)

• Material de los tubos: Aleación de acero al carbono (ASTM A53)
• Solids: 0 – 10 wt%
• Density: 1.015 – 1.060 g/l
• Temperature: 4°C – 8°C (39°F – 46°F)

Desafío

A French electricity company is utilizing water from an uphill reservoir to generate power at one of their hydroelectric power plants in France. Additionally, for maintenance purposes, sediments are dredged from the uphill basin and transported to the river downstream. To prevent sediment accumulation in the flow from the power plant to the river, a certain water/solids balance is required. Furthermore, it is essential to prevent wear on the turbine of the hydro plant caused by solids.

Instrumento utilizado

Solución

The contractor extended an invitation to four suppliers of density meters to validate and prove their respective density measuring methods. These suppliers utilize different technologies to determine slurry density through measurement via:

1. Radiation (Nuclear)
2. Acoustic impedance (Ultrasonic)
3. Electrical conductivity (Tomography)
4. Force and acceleration (Mass/volume)

However, one of the invited suppliers withdrew their participation in the comparison test in advance, resulting in the comparison of three technologies. This evaluation was conducted over a period of four weeks, during which data from each measuring instrument was collected. The density meter test configuration is depicted in the image below, with the Rhosonics’ density meter installed in a metal pipe piece specifically designed for this application.

Resultados

After four weeks of comparison test, the company chose Rhosonics SDM Slurry Density Meter as the winning technology. This choice was based on the accuracy and stability of the measurements, but also on the easy installation and short calibration compared to the nuclear and tomography devices.

The Rhosonics density meter contributes to:

• Prevention of plant shutdowns caused by sand accumulation in the flow to the river
• Prevention of wear on the power turbine caused by the water/solids slurry
• Improvement of dredging efficiency
• No nuclear source, so no costs for licences, permits or specialized personnel

You can read the whole story in the case study. Click on the images below to download the case study in the prefered language.

Póngase en contacto con Rhosonics para obtener más información sobre la concentración química o el control de la densidad. Si desea obtener más información sobre nuestras aplicaciones, consulte también nuestro casos de clientes y seminarios web.

¿Desea recibir actualizaciones frecuentes sobre nuestros productos? Entonces suscríbase a nuestro boletín o síganos en nuestras redes sociales en LinkedIn y Facebook.